saito
Brake-Pads Sinter With Abe
KAWASAKI/SUZUK DIFFERENT
Art. No. 10044354
Important notes
Find your bike:
RRP
£21.64 2
£17.31 1
You have placed the following items in the shopping basket:
Description
Brake-Pads Sinter With Abe KAWASAKI/SUZUK DIFFERENT
If you often ride your motorbike at high speeds and put a lot of strain on your brakes, we highly recommend saito sintered metal brake pads in OEM quality. These are high-performance brake pads produced by a world-renowned brand manufacturer and distributed exclusively by Louis. Similar sintered brake pads are also used in racing.
- High braking performance
- Extreme temperature resistance
- Short break-in period
- Optimal friction and deceleration values
- Excellent wet braking performance
- Minimal brake disc wear
- Made in the EU
Of course with ABE for Germany. You will find the corresponding KBA number on the back of the brake pad.
We have stored the exact dimensions of the Saito brake pads in the documents section.
The price is per set for one brake disc; if you have two discs, please order twice.
Be sure to watch: the Louis video *How To: Change Brake Pads*. With our tips and tricks, it's a piece of cake!
Important:
To prevent the new pads from squeaking after installation, ceramic paste is used for Sinter brake pads and vehicles with ABS. The paste must not get on the pads! More effective and cleaner than copper or ceramic paste is anti-squeal foil (10004371), which is stuck to the back of the pad. It is suitable for brake systems with and without ABS and for both sintered and Organic pads.
Please observe the safety instructions printed on the packaging and the specifications of your vehicle manufacturer. Installing unsuitable brake pads can cause serious damage to your vehicle. Installation should only be carried out by someone with technical knowledge or by a specialist.
Note: Sintered metal brake pads can be used on all steel brake discs. For cast brake discs, please observe the manufacturer's specifications or the test report or ABE.
Good to know:
Sintering is a special manufacturing process. It involves compressing up to 15 different powdered metals under heat (up to 1000 °C) and pressure. The results are a very high strength of the pad and an almost inseparable bond to the backing plate.
Manufacturer: Detlev Louis Motorrad-Vertriebsgesellschaft mbH | Rungedamm 35 | 21035 Hamburg | Germany | Tel. 00 49 (0) 40 - 734 193 60 | service@louis.de | www.louis.de
List of compatible motorcycles
Manufacturer details: saito
OEM spare parts? All well and good, but usually very expensive. The Japanese brand saito offers some highly attractive alternatives for wearing parts and accessories. How does that work? High-quality products are purchased from leading manufacturers around the world at the best possible terms and offered at low-cost prices under the brand name saito. Our customers benefit from this. Quality at a bargain price, because fun does not have to cost a fortune.
Info
Info
Accessories with ABE do not have to be entered in the vehicle documents. However, if you do not want to carry the certificate with you at all times, you can, for example, have an inspection center make an entry (for a fee) upon request.
If the accessory is to be used on a vehicle that is not listed in the ABE, individual approval is required.
Regulations in other countries may differ. Before ordering a product, please make sure that it is permitted for use in road traffic in your region or country.
Info
Documents
Reviews (62)
Write a review for Brake-Pads Sinter With Abe
Terms of use
We offer you the opportunity to rate products purchased from Louis and to share your experiences with them publicly.
To ensure that your objective and truthful report will be really beneficial to all readers, please observe the following rules.
To ensure that your objective and truthful report will be really beneficial to all readers, please observe the following rules.
- Please only rate products that you have personally used for their intended purpose.
- Please give reasons for your positive and negative criticisms. Only then will they benefit other customers and allow us to improve the product if necessary.
- Please don’t copy content that has already been published elsewhere. It’s your personal experience which counts.
- Data protection: Please don’t include your own and other people’s addresses, telephone numbers or URLs or even the names of third parties (people as well as companies) in your review.
- In your product review, please don’t make comparisons with third party product ranges. Regardless of whether you judge these positively or negatively, you, or we as operators of this online shop, would be violating competition law.
Fair play: Please follow these rules so that we don’t have to shorten or delete your rating.
Thank you for your review!
It will be checked once more – only product-related contributions will be published. Great that you’re helping others make their decision!
Your previous input will be lost!
Do you really want to cancel your entry?
All versions
Any questions?
Tradition since 1938
>90% stock items – fast shipping
Europe’s No.1 for motorcycle accessories
Free returns