Bike Lifter

The Rothewald hydraulic jack is an indispensable tool for repair and maintenance work—ideal for heavy motorbikes with double-tube frames, many quads, and ATVs. Its robust rollers and the included drawbar allow for optimal maneuvering. The practical pedal on the hydraulic pump allows you to lift your vehicle safely and lower it again safely using the hand valve.
You can secure your vehicle on the jack using the tension straps attached to the designated retaining eyes (lashing straps not included). The non-slip rubber pads effectively protect your vehicle from scratches. During longer jacking phases, the hydraulic piston can be relieved by mechanical locking.

• Accommodates frame widths up to max. 32 cm
• Safety bar to prevent the jack from lowering accidentally
• Practical parking brakes on the rollers can be locked with your foot
• External dimensions of lift (L x W x H): approx. 87 x 40 x 33.5 cm
• Support surface (B x D): approx. 32 x 32 cm
• Lifter height when retracted: approx. 14 cm
• Lift height when extended: max. 40 cm
• Weight of jack: approx. 35 kg
• Load capacity: max. 400 kg
• Hydraulic oil ISO VG15, fill quantity approx. 120 ml
• GBk-tested

• The Rothewald hydraulic jack is attached to the underside of the vehicle on the frame members below the engine. Therefore, always check whether these are easily accessible on your vehicle. Protruding floor panels, engine parts, primary drive housings, plastic parts, exhaust systems, or manifolds are not suitable support surfaces! If trim parts and/or the exhaust system are in the way, they may need to be removed.
• The lift is suitable for frame widths of up to 32 cm max. The frame must have a ground clearance of at least 14 cm. Always check that these requirements are met before ordering the lift!

• Please note the different order numbers for the hydraulic jack:

Order no. 10059599 - mail order (delivery consists of two packages)