LIQUI MOLY MOTORBIKE

LIQUI MOLY MOTORBIKE ENGINE FLUSH SHOOTER 80ML

Liqui Moly *Motorbike Engine Flush Shooter* is a highly effective cleaning fluid that is added to the engine oil. This frees the inside of the engine from troublesome deposits. It dissolves foaming and lacquer-forming agents. Oil-soluble and oil-insoluble residues of all kinds are suspended and removed from the oil circuit during the subsequent oil change. This allows the clean engine and the fresh oil to perform at their best. Liqui Moly *Motorbike Engine Flush Shooter* cleans and flushes oil circuits on motorbikes with four-stroke petrol engines. Also suitable for motorbikes with wet clutches. How often you should use the product depends on the degree of contamination of the oil circuit and the oil quality used. 80 ml (1 can) is sufficient for 0.8 to 2 litres of oil.

Instructions for use:

• Add Liqui Moly *Motorbike Engine Flush Shooter* to the engine oil at operating temperature before changing the oil.
• Then run the engine at idle speed for approx. 10 minutes. In the case of manual transmissions, operate the clutch lever several times and keep it pulled for a few seconds each time
• Then change the oil and filter.

• Ensures original engine performance
• Suitable for motorbikes with wet clutches
• High efficiency
• Long engine life
• Neutral against common sealing materials
• Tested for use with catalytic converters
• Cleaning and care
• Compatible with commercially available engine oils
• Easy to use
• Contents: 80 ml (sufficient for 1.8 to 2 l engine oil)

Repeated exposure may cause skin dryness or cracking Safety data sheet available on request. May produce an allergic reaction.