mo.unit basic

motogadget has come up with another ingenious innovation. The digital control unit mo.unit basic is the ideal solution for all motorbike accessories if you're looking to avoid bulky wiring harnesses and mechanical relays.

The mo.unit basic is approximately the size of a cigarette packet and is fully encapsulated, making it resistant to moisture, heat, cold and vibrations. The compact box is equipped with 12 inputs, 10 outputs and replaceable high-quality cable clamps. What's more, it has an integrated alarm system that can be installed in any position.

The motogadget mo.unit basic offers some important advantages.

• This device becomes the digital core of your entire vehicle electronics. It is used for operating all the necessary components on your motorbike, and at the same time performs the function of the electrical fuses.

Functions:

• Complete digital control, with the option of either 4- or 5-button operation
• Completely replaces the fuse box 10 independent circuits are digitally monitored and switched off if there is a fault. Once the fault has been rectified, the fuse function is automatically reset
• Integrated alarm system can be installed in any position
• Integrated, digital, load-independent flasher; automatic shutdown is optional and can be set; mo.wave mode can be selected
• Integrated hazard warning light
• Turn signal can optionally be set as a position light
• Integrated parking light and headlight flasher
• High and low beam (up to 200 W switching capacity) are controlled with a single button
• Integrated, digital brake light modulator; programmable flashing mode
• Acceleration-controlled emergency brake light (automatic warning signal)
• Integrated starter relay for starter system with solenoid (up to 30 A switching capacity)
• Intelligent and configurable management/switch-off of power-consuming devices so that the maximum starting power from the battery is available when starting the motorbike
• Integrated digital horn relay
• Two configurable additional outputs AUX1 and AUX2
• Diagnostics function for assigning input, output, circuit switching status, short-circuit diagnostics etc.
• Calibration and current measurement enables fault detection on all lamps

Dimensions/Specifications:

• L/W/H: 90 x 53 x 30 mm; distance between holes 74 mm
• Weight: 180 g
• Operating voltage: 6 V - 20 V
• Operating temperature: -20°C to +80°C

Securing by means of 2 x M5 stainless steel screws (installation and earth connection), 1 x M5 screw contact for battery positive terminal