ROADLOK XRA-080 BRAKE

ROADLOK XRA-080 BRAKE DISC LOCK 80MM, LEFT

For many, extra anti-theft protection for their motorcycles means massive chains and locks which are so heavy you can hardly lift them. But you can forget all that now, thanks to the Roadlok brake disc lock for various motorcycles with radial-mount brake calipers.

The lock unit or lock body of the Roadlok brake disc lock is permanently connected to the vehicle. It is attached to the left or right brake caliper, depending on the motorcycle. The only two things you have to "lug around" with you now are the locking bolt made of high-strength steel and the key.

• Shackle milled from high-quality aluminium
• Screwed directly to the radial-mount brake caliper
• Locking bolt made of high-strength steel engages directly in the bore hole in the brake disc
• The motorcycle is fully immobilised when lock is connected
• Once connected, the lock cannot be disassembled
• The danger of a crash if you forget to remove the lock before setting off is minimal
• Colour: black

Comprises:
1 x ROADLOK
1 x locking bolt
1 x dust cap
2 x keys
1 x fastenings, consisting of spacer sleeves and screws

A ROADLOK is mounted on the brake caliper of your motorcycle. To find out which model fits, you need to follow these 3 steps.

You must be able to confirm that you have one or more radially mounted calipers.
You need to look to see if you have only 1 front caliper (If so, you will need a left mounted ROADLOK) or 2 calipers (If so, you can use a right mounted ROADLOK).
You need to measure the distance between the mounting bolts of your caliper. This can be 80 mm (left only), 100 mm (left and right), 108 mm or 130 mm (right only)

Which ROADLOK fits my bike?

10037430

• Suitable for a radial brake caliper on the right front fork with a hole spacing of 100 mm

10037431

• Suitable for a radial brake caliper on the right front fork with a hole spacing of 100 mm
• For BMW models

10037432

• Suitable for a radial brake caliper on the left front fork with a hole spacing of 100 mm

10037433

• Suitable for a radial brake caliper on the left front fork with a hole spacing of 100 mm
• For BMW models

10037434

• Suitable for a radial brake caliper on the left front fork with a hole spacing of 80 mm

10037435

• Suitable for a radial brake caliper on the right front fork with a hole spacing of 108 mm

Good to know:
To guarantee safe operation, you should have the Roadlok brake disc lock installed by a
motorcycle workshop, unless you have sufficient experience to carry out the work yourself.

Strictly observe the tightening torque specified by the manufacturer, it may be necessary to use threadlocker.

The lock can only be mounted on a radial-mount brake caliper!